Valves

Features: In-Line or Angle pattern Stainless Steel, Brass, Alloy 400(Monel), A105 PTFE 2-piece chevron stem packing Metal-to-Metal Seat or PCTFE Soft Seat (Bubble Tight)

Features: In-Line or Angle pattern Stainless Steel, Alloy 400(Monel), A105 High temperature grafoil packing Metal-to-Metal Seat Back seat stem for safety.

Features: In-Line or Angle pattern Stainless Steel, Alloy 400(Monel), A105 High temperature grafoil packing Metal-to-Metal Seat Back seat stem for safety.

Features: In-Line pattern Stainless Steel, Alloy 400(Monel), Duplex PTFE packing provides leak tight seal and long life cycle Metal-to-Metal Seat or PCTFE Soft Seat(Bubble Tight).

Features: In-Line pattern, Bi-direction flow Stainless Steel, Brass, Alloy 400(Monel) High flow capacity Delrin, PEEK or PCTFE seats Replaceable O-Ring Seal and Soft Seat Gauge Ports available.

Features: In-line pattern Stainless Steel, Brass, A105 Compact design.

Features: Compact Design Ensure safe relief of system pressure Valve vent line pressure to atmosphere.

Features: Forged Body In-Line or Angle pattern Stainless Steel, Brass Metal to Metal Seat Wide flow range with ultrafine metering control (1° or 3° Stem).

Features: 2-Valves, 3-Valves, 5-Valves Manifolds designs Stainless Steel, Alloy 400(Monel), A105 Available direct or remote mounting Isolation, calibration and vent Available PTFE or Grafoil seats.

Features: 2-way or 3-way designs Stainless Steel, Brass, Alloy 400(Monel), A105 PEEK or PCTFE seats Easy replacement of ball seats.

Features: 2-way or 3-way designs Stainless Steel, Brass, Alloy 400(Monel), A105 PVDF, PEEK or PCTFE seats Fire safety designed to API 607, BS 6755 Part 2 Locking device available.

Features: Leak tight shut-off Low torque for easy operation Blow-out proof stem Bi-directional flow Compact and economical design Variety of end connections Variety of handle options (Butterfly, Oval, Push Turn, Self Locking, Key Lock Handle).

Features: Available in Multi Ports with 3-way 4-way, 5-way Stainless Steel, Brass, Allow 400(Monel) PTFE seats Two-piece seat fully encapsulates the ball Minimum dead space is easily cleaned.

Features: In-line pattern Stainless Steel, Brass, A105 POM-MoS₂seats Fire safety designed to API 607, BS 6755 Part 2 Locking device available.

Features: 2-way or 3-way designs Stainless Steel, Alloy 400(Monel) Trunnion bearings eliminate galling Spring loaded ball Seats PCTFE seats.

Features: In-line pattern Stainless Steel CF8M Long life cycle Easy swing out construction Anti-ststic device Fire safety designed to API 607, BS 6755 Part 2.

Features: Compact Design with one piece Hexagon body Stainless Steel, Brass, Allow 400(Monel), A105 PTFE seats.

Features: In-line pattern Stainless Steel, Brass, Alloy 400(Monel) Throtting capability Easy replacement of plug and O-ring Viton O-Ring seats / Seals.

Features: – Needle Valve Non-rotating Stem and bar stock body design Options for Vee or Regulating stem tips – Ball Valve One-piece, trunnion mounted style, ideal for severe duty application Two-way, three-way valve configurations.

Features: Two ball One needle (OS & Y) Stainless Steel, Duplex, A105 Savings on space, weight, Installation and cost Increased safety Easy installation and maintenance PEEK or PCTFE seats Fire safety designed to API 607/6FA.

Features: In-line pattern Stainless Steel, A105 Compact design ROM-MoS₂ Seats Fire safety designed to API 607, BS 6755 Part2 Locking device available.

Features: – Self relieving for prevention over-pressure in the body cavity and extension bonnet – The flow arrow is marked on the body according to the pressure relief – Extends valve packing and operator away from cryogenic fluid – Allows operation in normal working temperature range – Top entry for in-line maintenance – Easy in-line installation.

Features: In-line pattern Satainless Steel, Brass, Allow 400(Monel) Poppet design Provide large flows Viton O-ring Seats / Seals.

Features: All Welded design provides excellent sealing of fluid Compact Design ZCR, Tube Butt weld, and Hy-Lok tube Fitting 100% Helium leak tested.

Features: Angle pattern Stainless Steel External relief setting Provide large flows.

Features: Long life cycle and high temperature 1/4 turn on-off control AGA / CGA NGA 3.1 and ECE R110 Bi-directional flow Panel Mounting Disc spring live loaded 316 Stainless Steel.

Features: In-line pattern Stainless Steel, Brass Compact in-lone design Easy replacement of filter elements.

Features: Tee pattern Stainless Steel, Brass Easy replacement of filter elements Available by-pass Provided purging and sampling.

Features: Metal to metal diaphragm seal Low particle entrapment 100% helium leak tested 10 Ra or 5 Ra microinch internal surface.

Features: Metal to metal diaphragm seal Low particle entrapment 100% helium leak tested 10 Ra or 5 Ra microinch internal surface.

Features: 2-way Design 316L VOD Stainless Steel Metal bellows seal Long life cycle PCTFE seats.

Features: Metal to Metal Diaphragm Seals Leak Tight Integrity Internal Surface EP 10 Ra or 5 Ra micro-inch All Performed in Class 10 Clean Room Available for Semiconductor Applications.